1.Porduct Info
|
|
Model
|
BTS-3008-5V6A
|
|
Applications
|
.battery material research, battery capacity test, cycle life test , formation, grading, over charging /discharging test
|
|
|
Server object
|
.research institutes, universities and battery manufacturers all around the world
|
|
|
2.Features and functions
|
|
. Wide range of applications (cycle, formation, grading, over charging/discharging)
|
|
. Voltage output up to 110V, current output up to 3000A
|
|
. Adaptable to a wide range of products (cells, batteries, super-capacitors and battery modules, etc.)
|
|
. Completely independent channels allow users to run multiple independent tests simultaneously without affecting other channels
|
|
|
. With the BTS client software, data is easily viewed graphically
|
|
. Work without computer mode, up to 1GB testing data storage capacity
|
|
3.Specifications
|
Description
|
Product Specification
|
AC Input
|
AC 220V±10% 50Hz / AC 110V±10% 60Hz
|
Power
|
448 W
|
Resolution
|
AD: 16bit; DA: 12bit
|
Impedance Input
|
≥1MΩ
|
Voltage
|
Measuring Range
|
Charge: 10mV~5V
|
Discharge: 10mV~5V
|
Discharge Min Voltage
|
1.2V
|
Accuracy
|
± 0.1% of FS
|
Stability
|
± 0.1% of FS
|
Current
|
Range
|
Charge: 12mA~6A Discharge: 12mA~6A
|
Accuracy
|
± 0.1% of FS
|
Stability
|
± 0.1% of FS
|
Power
|
Output Power Per Channel
|
30W
|
Stability
|
± 0.2% of FS
|
Time
|
Rise Time
|
20ms (0~Full Range)
|
StepTime
|
≤ (365*24) hour/step
|
Time Format 00:00:00 (h:min:s)
|
Data Acquisition
|
Intervals
|
Time interval Δt: (1s~60000s)
|
Voltage interval ΔU: (10mV~5V)
|
Current interval ΔI: (12mA~6A)
|
Frequency
|
1Hz
|
Charge
|
Modes of Operation
|
CCC, CVC, CC & CVC
|
End Conditions
|
Voltage, Current, Test Time, Capacity
|
Discharge
|
Modes of Operation
|
CCD, CPD
|
End Conditions
|
Voltage, Current, Test Time, Capacity
|
Cycle
|
Cycles
|
65535
|
Steps
|
63
|
Nested Function
|
Max three levels of loops
|
Protective Function
|
Software
|
Power-off data protection
|
|
User-defined safety (upper and lower) tolerance of current, voltage and delay time
|
|
|
Channel Features
|
Independent pairs of closed loop for constant current source and constant voltage source
|
Channels
|
Independent control
|
Detection and Sampling
|
4-wire Connecting
|
Noise Density
|
<85dB
|
Data Management
|
|
Communication Means
|
RS232
|
Exports Formats
|
EXCEL, TXT, Graph
|
Communication Interface
|
Serial Port
|
Number of Channels PerCabinet
|
8
|
Dimensions (W*D*H)(mm)
|
3U(164),480*330*130
|
Connect Battery Tester to Computer For BTS3000(Com Port)
1. The network cable connect with any of the COM port of the tester, please refer to the following picture.
Maybe you are wondering what's the point of the 2nd RS-232 port, right? It's used for serializing all your BTS3000 testers(with COM port edition).
If you have more than one BTS3000 testers, then you can serialize them via network cable, and then you can manage them all directly from BTS
client easily. Which means you don't have to connect each tester seperately to your computer. Normally, you can serialize up to 10 (80 channels)
testers together.
2. The led light of the RS232 box should be on when you plug the usb port of the RS232 box. Yes, please connect the tester to your computer
via a RS232 box, instead of using a network cable directly.
3. Turn on the power button of the battery tester, the led light indicator of the power should be green.
4. Start up the software, normally, it will search the battery tester automatically.
Typical battery clamps for Neware battery testers
For most of Neware low power battery testers, there are 3 typical kinds of battery clamps for customers to choose from.
For low power battery tester, the machine itself has universal adjustable holder to test 18650 or other cylinder batteries, likes the following picture:
Neware battery tester with universal holder can be used for cylinder cells and button cells.
And for pouch cell or other types of batteries, we have more available clamps for you, alligator clamps,polymer clamps and separated polymer clamps.